3 in 1 Handheld Laser Welder Machine

Way of working:Continuous / Modulation Speed range of welder:0~120 mm/s Focal Spot Diameter:0.5mm

Product Introduction

Laser System	DT-HWPRO1000	DT-HWPRO1500	DT-HWPRO2000
Laser Type	1080nm Fiber Laser
Nominal Laser Power	1000W	1500W	2000W
Cooling System	Water Cooling
Way of working	Continuous / Modulation
Speed range of welder	0~120 mm/s
Focal Spot Diameter	0.5mm
Ambient temperature range	15~35 ℃
Environmental humidity range	<70% without condensation
Welding thickness	0.5-5mm
Welding gap requirements	≤1.2mm
Operating Voltage	AV220V
Packing Dimensions	1085897CM
Packing Weight	163kg
Fiber length	Standard 10m, the longest customized length15m
Welding penetration parameters
Material		Output power (W)	Maximum penetration (mm)
Stainless steel		1000	0.5-3
Stainless steel		1500	0.5-4
Stainless steel		2000	0.5-5
Carbon steel		1000	0.5-2.5
Carbon steel		1500	0.5-3.5
Carbon steel		2000	0.5-4.5
Aluminum alloy		1000	0.5-2.5
Aluminum alloy		1500	0.5-3
Aluminum alloy		2000	0.5-4
Galvanized sheet		1000	0.5-1.2
Galvanized sheet		1500	0.5-1.8
Galvanized sheet		2000	0.5-2.5

3 IN1 HANDHELD LASER WELDING CLEANING AND CUTTING MACHINE

Laser welding

Laser cleaning

laser cutting

Hand-held double swing head	Machine body built-in water machine	start up button
7inch control screen	Rust removal button	Emergency button
Yellow: Power	Green: Running	Red: Fault
water inlet	Water cooling control panel

3 in 1 laser head
1. The laser head has three functions (welding cleaning and cutting)
2. Touch screen, easy to operate
3. Small size, 360 degree operation without dead angle

Laser source

1. Ultra-high output power.

2. Higher photoelectric conversion efficiency.

3. Low maintenance cost.

4. Compact structure.

5. Small core diameter of 25um, anti-high reflection.

Built-in chiller design
Easy to carry, good dustproof effect

Smart control panel
One-key start, multi-parameter adjustment

Machine outlook	wire feeder	Laser source
Laser head	water cooling	Full set of the nozzle
control panel	Protective lens	Goggles

Mode A:

Laser Welding

With a whole new generation of continous Fiber Laser Source built-in, the peak power out increased 30% which allows you to get faster welding speed and deeper

penetration for various process requirements

Available to work combining with welding wires and welding wires auto feeder

Mode B: Laser Cutting

By switching accessories and reserved parameter settings with simple steps, you can cut metal sheets by HL-SFA Laser welder anywhere anytime.

Mode C: Laser Cleaning

With the intelligent system provided by HL-SFA Laser Welder, you can use the laser cleaning function by just simply switching modes rapidly and install the exclusive laser cleaning accessories kits comes with the machine.