With the development of laser cutting technology, fiber laser cutting machines are widely used, and in the process of use, we will also find some problems, such as slow cutting speed, poor cutting accuracy, etc., which may be due to the long-term use of fiber laser cutting machines Loss is caused during use, which affects the cutting performance. Let’s analyze the reasons for the decline in the cutting performance of the fiber laser cutting machine.
1. Power: After the machine is used for a long time, the power of the laser will drop more or less, which will directly affect the cutting performance of the laser cutting machine;
2. Distance: The distance between the workpiece and the nozzle also affects the cutting effect of the laser cutting machine, so adjust the appropriate distance without affecting the cutting performance;
3. Position: The focus position directly affects the cutting progress. The diameter of the focus spot should be as small as possible to produce a narrow slit. If the cutting performance decreases, it is a good way to adjust the focus position;
4. Long-term overload production, no maintenance and improper operation by operators are all reasons for the decline in the performance of cutting equipment.
To sum up, we have found the reason for the decline in the performance of the laser cutting machine, then we can prescribe the right medicine and take preventive measures to avoid or slow down the decline in cutting performance in a timely and effective manner.
1. Usually pay attention to the maintenance of the machine. Long-term processing of fiber laser cutting machines will cause wear and tear of parts, which will inevitably affect the cutting performance of the machine, so daily maintenance is very important, and daily maintenance can be carried out according to the daily maintenance table of the production company.
2. Standardize the operation of the machine. Now the large-scale fiber laser cutting machine production equipment manufacturers will let customers arrange special personnel to receive training on machine operation, and they will arrange on-the-job operation after passing the training. Operation by trained employees is not only conducive to the normal operation of the fiber laser cutting machine, but also effectively avoids safety accidents.
![](https://www.laserdt.com/wp-content/uploads/2022/05/s1.jpg)
How To Prevent The Cutting Performance Of Fiber Laser Cutting Machine From Decreasing?
- Time: 01/02/2024
- Author: admin
Related Post
No posts found
Related Cases
No posts found
Related Products
No posts found